For housing discussions.
Preferably it would have a latch that I can lock so kids can't get into it. I thought about just buying one of the zilla critter cages, but I have several 10 gallon tanks, so I thought it would be better to find a way to use one I already have instead.
Any ideas? Pictures would help as I...
Around 10 months or a year ago (I don't know it all blends together) I updated this GBB enclosure to look like it was from a "Post Arachnid Apocalypse" It's finally done now that there is plenty of webbing over everything and you are absolutely sure that the soldiers in question are dead. ...
I just got a shipment of exo-terras in for my arboreal t's.
I have a box of the concrete fake stones like you use to make a fireplace in your home.
I would like to use one or two in either a P.cambridgei enclosure or A. metallica enclosure.
from owning birds in the past I know there...
Hi! I use a Sistema plastic container to house my S. alternans, and I like it because of its tight fit and 4 locking sides. I was just curious if heatpads would be responsible for warping hard plastic like this? I wouldn't want my centipede to escape in my dorm, especially.
Sifting through old enclosures while I was on college break caused me to come across these two screen, well-ventilated enclosures in my garage. I was considering stick insects, I was considering arboreal Ts (probably unlikely), I was considering amblypygids. Originally from the days when I was...
So I have this 11x6x6 acrylic container that my pterinochilus murinus came with, and since he\she's been rehomed, I've been wondering if I could keep anything in there? Here's a picture
Today i bought 5 new terraria for some subadult arboreal species :
2 of them are for P. metallica :
So I've got two rapidly growing arboreal slings (P. irminia, P. regalis) and recently bought two tall glass enclosures that should easily accommodate them for the next year or two. There is currently no cross-ventilation in the enclosure - it's solid glass on all four sides. It is not an exoterra....
Hello this is my project eight in the old cabinet Terraria
ventilation 5cm wide, placed on the back of the terrarium.
Interior, expanded cork , roots, moss chrobotek , coconut fiber
currently two terrariums finished another six
Left is Versicolor, Right is A. metallica.
Freshly molted Versi out drinking water droplets off the creeping fig
(Note - water dishes removed for pics)
I would like to show the enclosure that I started building for my GBB.
It is a 45x45x60cm enclosure.
I was very inspired by a member here on Arachnoboards with his enclosures built as root system hanging from the top mount on the enclosure!
It is the most original enclosure setup I...
I found a 2.5 gal aquarium at the goodwill a few weeks back for $4 and decided to put it to good use. My A. Urticans is around 2 1/2 inches
now and was starting to fill up her smaller enclosure so time for a rehouse!
All the stuff I used to put this together was laying around here in my...
These enclosures would be perfect for the terrestrial T's in my classroom. This is mainly due to the fact that the lid, while opening via sliding, can be locked with an actual lock. I shouldn't have too hard of a problem finding an empty aquarium within the district, however it will most likely...
Rather a medium-large Scolopendra.
Would something like this http://cdn3.volusion.com/dfpuu.bczkw/v/vspfiles/photos/00001-3.jpg?1363177501 work fine for something such as S. alternans or dehaani? Just considering the ventilation vs humidity, but I really like this kind of enclosure for some reason...
these look like 12" or so flush lid amac boxes but i can't find any this big.
37G Planted Viv for Avic
I just joined up here. I haven't kept tarantulas since I was a little kid but I am going to be getting an Avicularia (still deciding on a species) to go with a terrarium setup that I have been working on.
I link a picture of the setup below. I am more...
Greetings to all!
I have been interested in switching all of my tarantulas enclosures to something that is more uniform and appealing to the eye (SOME MAY SAY I HAVE OCD). I did some research and came across her website, I like the design of her enclosures and the "same look" they all...
24 holes around handle 12 on each side. Would this be enough to house a P. Metallica in? or should i add more holes around the container?
I recently purchase some GE brand 100% white silicone. I had sealed my FBT tank (water half) with it as well as a 90 tank I have laying around that had a broken end. Is this a good one to use? Will it leech? I am aware it need to dry for at least 48 hours but had dried for weeks as I have nothing...
Just thought I'd share my Exo Terra enclousure. It houses my Avic affectionately called "neytiri"
Bored, midnight, websurfing, looking for technical documents to put me to sleep. Found some info.
Yes, it is completely safe to use hot glue in your tanks, toxicity wise. But there are several things that can screw this wonderstuff up.
First, hot glue contains wax. While the stuff is...
I know these guys like things moist the way a T blondi would. Having owned a T blondi in the past I built on that experience and decided to go with a "false bottom." I did NOT include anything between the sub and the lava rocks as I have read that animals can get stuck between the two and I wanted...
Like the title says, I'm looking into getting a giant centipede. Particularly Scolopendra Subspinipes. I'll be at a local reptile show on the 14th so I guess I'm limited to whatever they have available (assuming it will work with the enclosure and it's within my budget) so it could vary but they've...
Anyone know a good undershev lighting? my enclosures are 10x10x12 and there is about 10 inches untill top of shev im looking for some nice lights to have to display my beautiful collection any recommendations and maybe some pictures of how it looks if necessary
Anything special need to be done to use theese? I grabbed one outside after seeing the rediculous prices for small fake ones. Side note it is about -20 c here or so so would that eliminate having to bake them?
There are currently 3 users browsing this forum. (0 members & 3 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.